Color matching issues happen on a more frequent basis- Color matching issues within the apparel industry happen every now and then. That can be predicted, because the apparel industry uses numerous materials like polyester, nylon, rayon, cotton, silk, etc., that potentially all have to match each other.
We all know that no material supplier can match every color standard within a CMC DE of .8 each time in all your light sources. However, if Textile Testing Equipments suddenly takes a nose-dive and they begin sending you lab dips or production that look NOTHING like your standard or are consistently above a 2. CMC DE without explanation, you need to address it IMMEDIATELY together with your supplier.
Tend not to pass go- do not collect $200. Have your corrective course of action set up and begin its execution NOW. Don’t turn a blind eye and expect that things can get better. Color matching issues that go un-addressed always become worse, never better.
Material quality issues happen regularly- Your supplier used to submit passing test reports with every lot such as you required. Better yet, they had an inside certified lab, tested everything internally, and do not shipped anything outside your tolerance without forewarning as well as a darn valid reason (and after that only on rare occasions).
But lately, they are sending material in your garment makers with failing test reports with no prior warning or explanation, or they have stopped sending reports with all the goods altogether. Possibly even your garment maker is re-testing the item since there are no test reports, in fact it is failing their in-house testing, that is now holding increase your garment production. Nip this in the bud immediately, by executing your brand’s corrective plan of action.
After the problem is taken to their attention, the supplier offers to fix them- but the problem is never addressed fully. Sure, they read and react to your emails a little faster for a few weeks after you bring the issues for their attention, and possibly they can come visit in-person to smooth things over. But monthly later it’s deja-vu once again, and you’re obtaining the same issues as before.
Your garment maker refuses to keep the easiest interaction with the supplier without you on copy- Initially, your garment maker only copied you on the most essential issues. But with time because of these increased ศูนย์ ทดสอบสิ่งทอ and quality issues, the garment maker has lost all trust within the material supplier and is copying you on EVERYTHING. EVERY. LITTLE. THING. In addition, the garment maker could even begin to give you swatches of each roll of material, requiring sign-off from you (the manufacturer) before they are going to accept to cut it and create your garments. This is CYA at it’s finest, and i also don’t need to inform you that you don’t have time to deal with this.
The supplier changed your material specs without your consent. This is actually the ultimate sin as far as I’m concerned, and it’s happening a lot more frequently within these economic conditions. It usually happens similar to this: the thing is increased material quality failures, send the samples away and off to a third party lab to be analyzed, and the weight is completely off, or the filament type used will not match your material spec sheet. A material failure will frequently tip you off to the reality that the fabric that you are pathaf shipped will not be exactly what it was supposed to have been. This takes place once, it’s time for corrective action plan. Should this happen twice, it’s time to find a new supplier- a true supplier partner.
When are you ready to express goodbye? You will find too many quality material suppliers out there so that you can be saddled with a poor performing supplier. Issues arise from time-to-time, but if 3 from the 5 issues above ring true for you personally today, it is probably time and energy to re-source your material to a supplier who will appreciate your small business.