Do-it-yourself wooden garden storage boxes are a simple means of storing seasonal and temporary items. Wooden storage boxes can be used in the garage, on the patio or in a storage shed to hide seasonal equipment, such as patio sets, pool equipment, bikes and machinery. While it is possible to buy a storage box at a hardware store, building a wooden one at home is a cheaper alternative and also the box can be personalised and custom-built to fit into any space.
Measure the space where the …Godwins Removals Outdoor Storage Box will be placed, and take note of the figures for that height, width and depth you will need the box to become. Draw the pieces necessary for the four sides from the box on the plywood sheets, utilizing a pencil. You will require two side pieces measuring height by depth, and also the front and rear pieces should measure height by width. Cut out the 4 pieces using the saw. Utilize the sandpaper to create the edges and surfaces smooth and splinter-free.
Arrange one of many side pieces so it is perpendicular towards the front piece. Both pieces should be on end, as well as the end from the side piece should be covered by the outer lining side in the front piece. In other words, along side it pieces will likely be attached in the front and rear piece ends.
Attach both pieces using the drill and at least four screws from the front piece. Attach the second side piece in the same way to the opposite end in the front piece. Guarantee the second side piece’s end is within the front piece. Last, attach your back piece using the drill and screws, so both ends from the side pieces are protected by this last piece. You ought to now have a rectangular wooden frame.
Measure the rectangular frame’s perimeter. This may supply the measurements for your bottom and lid pieces. Write the measurements down. Transfer the measurements towards the plywood, employing a pencil. Be certain they’re square, then cut them by helping cover their the saw and sandpaper both pieces.
Attach the base piece by lining it up for the wooden frame. Place the level on the box to ensure the piece is level and also. Attach it with screws placed every 6 inches, drilling the screws from the bottom piece and into comfou four sides. When done, turn it over, so you own an open box without a lid.
Attach two hinges for the lid piece, screwing them to the underside of among the long sides. Flip the wooden garden storage box on its side to put in the lid properly. Line the lid approximately the box so that the hinges are within the box and attach the hinges using screws as well as the screwdriver. Flip the wooden storage box right side up and close the lid.